Dear all,
I have a small VMware laboratory at home.
1 vcenter 5.5: HP Proliant DL 360 (2xCPU X5450 @3.0GHz)
1 Esxi 5.5: Dell PowerEdge 2950 (2xCPU E5345 @2.33GHz)
1 ESXi 5.5: HP Proliant DL 380 G5 (2xCPU 5160 @3.00GHz)
All connected to the same datastores.
On each vSphere, I have configured the FT network as follow (same network):
FT_VMkernel : Fult tolerance logging
My both ESXi are runjning as Cluster DRS/HA (EVC off).
From the ESXi side, I can see on both that FT (configuration) -> Host Configured for FT: No
But in the same time, I was able to configure with FT only one VM machine (web server under FreeBSD).
I have tried to do the same with others VM (windows, Linux) without any success. (Replay is unavailable for the current configuration. )
My question is, why if my ESXi server are not configured for FT, I was able to make it working only on one VM machine ??
Is there any thing to do to make the FT fully working ?
Thx for your support.