Re: Vcenter Server 5.5U2 No CIM on ESXi4.1 host
Yes thanks I had read most of those, but it didn't fix my problem, even though I attempted most of the suggestions. I think as Vcentre Server U2 is only just released its a bug with ESXi4.1 Hosts. I...
View ArticleRe: ESXi 5.5 U1 on IBM x3650 M4 Server
had tha same issue, in a little bit another way ...tried to install ibm customized image 5.5 U1, we had permanent reboots through the installation process. we changed boot order to : legacy...
View ArticleRe: Upgrade to 5.5 U1 using update manager stays non-compliant
I have HP BL 460 G8 blade server and I upgraded to ESXi 5.5u2 from ESXi 5.1 with VMware-ESXi-5.5.0-Update2-2068190-HP-5.76.36-Sep2014.iso Before remediate the upgrade attached baseline, you need to do...
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
Ok, I've ran Image Builder using an offline version of 5.5 U2 and I am adding the vib igb-3.1.17-offline_bundle-455019.zip to the profile, as I believe this is the custom vib. I can see it there when I...
View ArticleRe: Upgrade HP vSphere 5.5 to 5.5 U1 – Error Conflicting VIBS
The Update 2 Sept 2014 HP custom image is available on the HP download site.
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
Scowley,You were supposed to add igb-5.2.5-offline_bundle-1682588.zip right?>>Used ESX-Customizer to replace the file on original 5.5 U2 ISO with...
View ArticleRe: Using Update Manager to upgrade ESX 5.1 to 5.5 - ERROR Conflicting VIBS
Does anyone know if this issue is resolved with the sept issue of the ISO ?
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
Sorry, yes I tried this too. The version of igb currently installed on the host is 3.1.17. I tried loading this onto the 5.5 U2 iso but I also tried the newer 5.2.5 version. Image Builder allowed me to...
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
With Imagebuilder, there is also option to remove software package. "Remove-EsxSoftwarePackage” Give that a try. I think this will work fine!!!
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
Ah, that's exactly what I need. Thanks! I will try this now.
View ArticleNeed Help to Upgrade environment (Pre-requisite Checks)
Dear Team, In my current environment I have following. Blade Server Model : Cisco UCSB-B200-M3Storage : EMC VNX 5300 & EMC CX4 120C8Network Switch : Cisco Nexus 1110 (Physical Hardware Appliance)...
View ArticleNavigating to the VSphere web client downloads a file!!
I've tried this on windows and linux, chrome and firefox. I can't seem to get it to stop! Every time I navigate to the VSphere web client, it downloads a file called download. It doesn't launch the...
View ArticleRe: Add additional Ram To esxi server !
This will work just fine. I did it a week ago on my ESXi 5.5U1 host.Like others have said... just do the following:Power down all of the VM's on that hostThrough the console shut down the host...
View ArticleRe: Upgrade HP vSphere 5.5 to 5.5 U1 – Error Conflicting VIBS
Did you hear back from vmware support? I am having the exact same problem. Using VUM to upgrade from HP ESXi 5.5 U1 to HP ESXi 5.5 U2 image seems to complete successfully and I've ran the tests listed...
View ArticleRe: Upgrade HP vSphere 5.5 to 5.5 U1 – Error Conflicting VIBS
Yes, just got the final response today. ----- As we discussed this is due to a number of VIBs that are part of the Upgrade ESXi Image (ISO) that are not found on the host after the upgrade has...
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
Are you still facing any problems during upgrade after removing the vib or is it resolved?
View ArticleUpgrading ESXi 5.0 to 5.5U2 w/Adaptec controllers
Hello again everyone. We are getting closer to our update of ESXi 5.0 to ESXi 5.5U2. We have an Essentials licence if that makes any difference to the below. Our host has an Adaptec 29320LPE SCSI...
View ArticleRe: Using Update Manager to upgrade ESX 5.1 to 5.5 - ERROR Conflicting VIBS
HP say it is, however not tested yet. Please post back if you manage to test before we do!
View ArticleRe: Using Update Manager to upgrade ESX 5.1 to 5.5 - ERROR Conflicting VIBS
Hello All, It worked for me ! I had the same initial issue (conflicting VIBs) on a DL180 G6 but I am just using the standard update through ISO booting, not through VUM. Here is what happened to me : -...
View ArticleRe: Using Update Manager to upgrade ESX 5.1 to 5.5 - ERROR Conflicting VIBS
SAME HERE! 5.5U2 worked correctly. Looks like they have addressed the the VIB issue here!
View Article