Vsphere esxi 5.5 installs on acer but does not boot?
Hi, I am having trouble getting vmware esxi 5.5 working on a acer veriton desktop. I was able to add the Realtek network driver and get the product to install on the hard disk - however after reboot...
View ArticleRe: Install detects drive, but won't boot
They are set however the BIOS doesn't give the option to address the drive alone - just the RAID controller. I spoke with Lenovo again yesterday and they said the only way for the internal drives to...
View ArticleQuestions on reinstall vCenter and auto deploy and Nexus1000V
Hi Our vCenter Server 5.1 is not healthy anymore. It can't talk properly to SSO anymore, reregister with SSO fails and ADAM gives errors as well. VMware Support concluded that a reinstall of vCenter is...
View ArticleUpgrade issue from vSphere 4.0 U1 to 5.5 U2
Hi, I'm trying to migrate from 4.0 to 5.5. When the install runs it tells me I have 3rd party custom vibs that are not on the .ISO. The warning is for 'vmware-esx-drivers-net-igb'. I've done some...
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
I think you need to create a custom install disk using the "image builder" I had done this in the past with 3rd party network cards. Check this out here:vSphere Documentation Center Basically, you...
View ArticleRe: Vsphere esxi 5.5 installs on acer but does not boot?
Take a picture of the error and repost.
View ArticleRe: Vsphere esxi 5.5 installs on acer but does not boot?
Have you checked your hardware against VMware's hardware compatibility list HCL?
View ArticleRe: Autodeploy cache cleanup
What directory did you empty?Check this out here:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2000988 Also try running the repair command:...
View ArticleRe: Autodeploy cache cleanup
I deleted the content of /var/lib/rbd/cache on the VCA, this is the location where all VIBs are stored.The link does not give a hint how to remove VIBs.My point is to get rid of old VIBs as new...
View ArticleRe: Autodeploy cache cleanup
Open powercli, kick off your image builder, import the image in question, and remove the unwanted vib. Then export the image and u VMware vSphere 5.1"Remove-EsxSoftwarePackage"Check out Duncan Epping's...
View ArticleVcenter Server 5.5U2 No CIM on ESXi4.1 host
I have just upgraded to a Vcenter Server 5.5u2 from 5.5u1a . All functions work apart from hardware monitoring on my ESXi4.1 host. The other host is 5.5u2 and that reports fine. The ESXI also reports...
View ArticleRe: vsphere web client displaying empty inventory
that did it. Thanks. Dont remember having the need to do that on my other vcenter. but it worked.
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
Thanks antonmajor. I already tried custom iso using ESX-Customizer but I will try with Image Builder if it is available in ESX 4.0.
View ArticleRe: Vcenter Server 5.5U2 No CIM on ESXi4.1 host
Please try this:After connecting to viClient: Under Configuartion tab -> security profile > firewall properties > CIM-Server > options > restart.Then back to Hardware status and perform...
View ArticleRe: Vcenter Server 5.5U2 No CIM on ESXi4.1 host
There isn't an option to start the CIM service listed. Only on the 5,5 Host That's the issue. That said using a 5.5U1 Vcenter there isn't that option either for a 4.1 Host
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
For creating custom iso using PowerCLI , please follow Using the vSphere ESXi Image Builder CLI | VMware vSphere Blog - VMware BlogsHope this helps!!
View ArticleRe: Upgrade issue from vSphere 4.0 U1 to 5.5 U2
Thank you SatyS. Trying this now. Have PoweCLI downloaded, now just looking for the offline (.ZIP) version of 5.5 U2. WIll keep you posted and thanks for the help.
View ArticleClik here to view.
Re: Vcenter Server 5.5U2 No CIM on ESXi4.1 host
Did you mean, Under Firewall properties, CIM server is not listed?If it is listed, down there is Options tab. Click on it and press Restart.
View ArticleClik here to view.
Re: Vcenter Server 5.5U2 No CIM on ESXi4.1 host
Yes its not listed for the 4.1 host only the 5.5 host. This however is the same in a Vcenter Server 5.5U1a which does work fine. See screenshot This is the same tab but the 5.5 Host
View ArticleRe: Vcenter Server 5.5U2 No CIM on ESXi4.1 host
There is almost similar thread.Please have a look https://communities.vmware.com/thread/219556?start=0&tstart=0May be this will help you
View Article